🔥 Fire Door & Commercial Door and locks Inspection – Montreal 🔐

Ensure your building is fully fire-safe and compliant with Serrurier Shay, your trusted locksmith and fire door experts in Montreal since 2007 🏢.

We provide comprehensive inspections to make sure all fire doors, push paddles, and commercial doors meet regulations and protect your occupants, property, and business.

✅ Services We Provide

• 🔹 Check doors and frames for damage or misalignment
• 🔹 Test locks, latches, hinges, and handles
• 🔹 Inspect automatic closers and push paddles
• 🔹 Verify garbage chute and waste chute doors self-close properly 🗑️
• 🔹 Confirm fire-rated plates are visible and not painted over 🖌️
• 🔹 Ensure windows on exit doors provide fire department visibility
• 🔹 Take photos before and after inspection for full transparency 📸

📝 Client Preparation Checklist

Fire Doors & Locks 🔑

• ⬜ Doors open and close easily
• ⬜ No visible damage
• ⬜ Locks and latches function properly
• ⬜ Certification plates are clear and not painted over

Automatic Closers & Maintenance ⚙️

• ⬜ Closers function smoothly, no oil leaks, no slamming
• ⬜ Garbage/waste chute doors close automatically
• ⬜ Fire and smoke seals are in good condition

Push Paddles & Front Entry 🚪

• ⬜ Push paddles visible: silver on black/brown doors, silver or Duro on aluminum doors

Commercial Exit Doors 🏢

• ⬜ Windows for fire department visibility on steel doors leading to office areas
• ⬜ Certification plates must remain visible, not painted

Site Preparation 🏗️

• ⬜ Mark doors with tape or notes
• ⬜ Mark floors and door locations clearly
• ⬜ Building management or staff present for access
• ⬜ Remove obstacles blocking doors
• ⬜ Provide any previous reports or certifications

💡 Note: If markings or on-site guidance are not provided, labor time may increase. Being on-site helps speed up the inspection ⚡.

⚡ How to Speed Up the Inspection

• Mark all doors with yellow notes or tape 🟨
• Mark floors and door locations clearly
• Send a diagram if you cannot be on-site 🗺️
• Best option: Be on-site with us to show all doors 🧑‍🔧

🛠️ Step-by-Step Inspection Process

1. Full walkthrough of all doors 🚶‍♂️
2. Check latches, closers, push paddles, hinges, handles, electric strikes, and exit devices 🔧
3. Inspect garbage chute doors and windows to ensure they self-close properly 🗑️
4. Clean fire-rated plates and remove paint/obstructions 🖌️
5. Repair or replace defective hardware ⚙️
6. Confirm all exit paths are clear and compliant ✅

📞 Contact Us

Office (by appointment only – no walk-ins)
📍 2405 Rue Valade, St-Laurent, Quebec, H4M 1N2

Hours 🕘

• Sunday–Friday: 9:00–17:00 → 514‑836‑9097

💻 For customer service, fill out the form and send photos: Contact Form

With Serrurier Shay, you get a fast, efficient, and fully transparent inspection 🔐📸 – ensuring all doors are safe, compliant, and functional.